Dell S4810 Reference Manual page 611

stack-unit id
port-set
number
[counters]
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Example
Dell#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
-----------------------------------------------------------
EntryId Description
-----------------------------------------------------------
2048
2047
2045
2044
2043
2042
2041
2040
2039
2038
2037
2036
2035
2034
2033
384
383
382
380
379
4
Debugging and Diagnostics
queue the packet takes as it dumps the raw system flow
tables.
Enter the keywords stack-unit to select a stack member
ID. The range is 0 to 11 for the S4810.
Enter the keywords port-set with a port-pipe number.
The range is 0 to 0 for the S4810.
(OPTIONAL) Enter the keyword counters to display hit
counters for the selected ACL or QoS option.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
STP BPDU Redirects
LLDP BPDU Redirects
LACP traffic Redirects
GVRP traffic Redirects
ARP Reply Redirects
802.1x frames Redirects
VRRP frames Redirects
GRAT ARP
DROP Cases
OSPF1 STUB
OSPF2 STUB
VRRP STUB
L2_DST_HIT+BC MAC+VLAN 4095
L2_DST_HIT+BC MAC
Catch all
OSPF[224.0.0.5] Packets
OSPF[224.0.0.6] Packets
VRRP Packets
BCast L2_DST_HIT on VLAN 4095 0
BCAST L2_DST_HIT Packets
Unknown L2MC Packets
#HITS
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
611