Dell S4810 Reference Manual page 1218

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id database router
Information command shown in the following example.
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Number of Links
Link connected
to:
(Link ID)
(Link Data)
Number of TOS
Metric
TOS 0 Metric
Example
Dell#show ip ospf 100 database router
1218
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA age.
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Displays the link state sequence number. This number
detects duplicate or old LSAs.
Displays the Fletcher checksum of an LSA's complete
contents.
Displays the length in bytes of the LSA.
Displays the number of active links to the type of router
(Area Border Router or AS Boundary Router) listed in the
previous line.
Identifies the type of network to which the router is
connected.
Identifies the link type and address.
Identifies the router interface address.
Lists the number of TOS metrics.
Lists the number of TOS 0 metrics.
OSPF Router with ID (1.1.1.10) (Process ID 100)
Open Shortest Path First (OSPFv2 and OSPFv3)