Related
show ip ospf database asbr-summary
Commands
information.
show ip ospf database asbr-summary
Display information about autonomous system (AS) boundary LSAs.
S4810
Syntax
show ip ospf [process-id | vrf vrf-name] database asbr-summary
[link-state-id] [adv-router ip-address]
Parameters
process-id
vrf vrf-name
link-state-id
adv-router ip-
address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
1204
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followed by the name of the VRF to
view display information about AS boundary LSAs
corresponding to a specific VRF.
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— displays only ASBR summary LSA
Open Shortest Path First (OSPFv2 and OSPFv3)