Show Ip Bgp Paths - Dell S4810 Reference Manual

Version 7.8.1.0
Version 7.7.1.0
Usage
The following describes the show ip bgp next-hop command shown in the
Information
following example.
Field
Next-hop
Via
RefCount
Cost
Flaps
Time Elapsed
Example
Dell#
Dell#

show ip bgp paths

View all the BGP path attributes in the BGP database.
S4810
Syntax
show ip bgp[vrf vrf-name] paths [regexp regular-expression]
Parameters
vrf vrf-name
regexp regular-
expression
476
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the next-hop IP address.
Displays the IP address and interface used to reach the next
hop.
Displays the number of BGP routes using this next hop.
Displays the cost associated with using this next hop.
Displays the number of times the next hop has flapped.
Displays the time elapsed since the next hop was learned. If
the route is down, this field displays time elapsed since the
route went down.
show ip bgp next-hop
Next-hop
172.16.0.2
(OPTIONAL) Enter the keyword vrf to view all path
attributes in the BGP database corresponding to that VRF.
NOTE: You can use this attribute to view information on
all path attributes in the BGP database that correspond
to either a default or a non-default VRF.
Enter a regular expression then use one or a combination of
the following characters to match:
• . = (period) any single character (including a white
space).
• * = (asterisk) the sequences in a pattern (zero or more
sequences).
• + = (plus) the sequences in a pattern (one or more
sequences).
• ? = (question mark) sequences in a pattern (either zero or
one sequences).
Resolved
YES
Border Gateway Protocol