Test Cam-Usage - Dell S4810 Reference Manual

Example (Non-
Dell#show cam-acl
Default)
-- Chassis Cam ACL --
L2Acl
Ipv4Acl
Ipv6Acl
Ipv4Qos
L2Qos
L2PT
IpMacAcl
VmanQos
VmanDualQos:
Ipv4pbr
-- Line card 4 --
Current Settings(in block sizes)
L2Acl
Ipv4Acl
Ipv6Acl
Ipv4Qos
L2Qos
L2PT
IpMacAcl
VmanQos
VmanDualQos:
Ipv4pbr
Dell#

test cam-usage

Verify that enough CAM space is available for the IPv6 ACLs you have created.
S4810
Syntax
test cam-usage service-policy input input policy name linecard
{number | all}
Parameters
policy-map
name
number
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
508
Current Settings(in block sizes)
: 2
: 2
: 2
: 2
: 2
: 1
: 2
: 0
0
: 0
: 5
: 5
: 1
: 1
: 1
: 0
: 0
: 0
0
: 0
Enter the name of the policy-map to verify. Maximum is 32
characters.
Enter all to get information for all the linecards/stack-units
or enter the linecard/ stack-unit number to get information
for a specific card. The range is : 0-11 for S4810; 0-7 for all
other S-Series
Content Addressable Memory (CAM)