Ipv6 Unicast-Routing - Dell S4810 Reference Manual

Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Usage
When the interface goes down, Dell Networking OS withdraws the route. The route
Information
is re-installed, by Dell Networking OS, when the interface comes back up. When a
recursive resolution is "broken," Dell Networking OS withdraws the route. The route
is re-installed, by Dell Networking OS, when the recursive resolution is satisfied.
After an IPv6 static route interface is created, if an IP address is not assigned to a
peer interface, the peer must be manually pinged to resolve the neighbor
information.
Example
Dell(conf)#ipv6 route 44::0 /64 33::1 ?
<1-255>
permanent
tag
Dell(conf)#ipv6 route 55::0 /64 ?
X:X:X:X::X
gigabitethernet
loopback
null
port-channel
sonet
tenGigabitethernet
vlan
Dell(conf)#ipv6 route 55::0 /64 gigabitethernet 9/0 ?
<1-255>
X:X:X:X::X
permanent
tag
Dell(conf)#ipv6 route 55::0 /64 gigabitethernet 9/0 66::1 ?
<1-255>
permanent
tag
Dell#
Related show ipv6 route
Commands

ipv6 unicast-routing

Enable IPv6 Unicast routing.
S4810
Syntax
ipv6 unicast-routing
To disable unicast routing, use the no ipv6 unicast-routing command.
IPv6 Basics
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Distance metric for this route
Permanent route
Set tag for this route
Forwarding router's address
Gigabit Ethernet interface
Loopback interface
Null interface
Port channel interface
Sonet interface
TenGigabit Ethernet interface
VLAN interface
Distance metric for this route
Forwarding router's address
Permanent route
Set tag for this route
Distance metric for this route
Permanent route
Set tag for this route
— views the IPv6 configured routes.
937