Dell S4810 Reference Manual page 477

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
The following describes the show ip bgp path command shown in the
Information
following example.
Field
Total
Address
Hash
Refcount
Metric
Path
Border Gateway Protocol
• [ ] = (brackets) a range of single-character patterns.
• ( ) = (parenthesis) groups a series of pattern elements
to a single element.
• { } = (braces) minimum and the maximum match count.
• ^ = (caret) the beginning of the input string. If you use
the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
• $ = (dollar sign) the end of the output string.
EXEC
EXEC Privilege
Added support for VRF for the S4810, S4820T, and S6000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the total number of BGP path attributes.
Displays the internal address where the path attribute is
stored.
Displays the hash bucket where the path attribute is stored.
Displays the number of BGP routes using this path attribute.
Displays the MED attribute for this path attribute.
Displays the AS path for the route, with the origin code for
the route listed last. Numbers listed between braces {} are
AS_SET information.
NOTE: Enter an escape sequence (CTRL+v) prior to
entering the ? regular expression.
477