Distribute-List In - Dell S4810 Reference Manual

inter-area dist2
intra-area dist1
Defaults
•
•
•
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage To specify a distance for routes learned from other routing domains, use the
Information redistribute command.

distribute-list in

Apply a filter to incoming routing updates from OSPF to the routing table.
S4810
Syntax
distribute-list prefix-list-name in [interface]
To delete a filter, use the no distribute-list prefix-list-name in
[interface] command.
Open Shortest Path First (OSPFv2 and OSPFv3)
(OPTIONAL) Enter the keywords inter-area then a number
to specify a distance metric for routes between areas. The
range is from 1 to 255. The default is 110.
(OPTIONAL) Enter the keywords intra-area then a number
to specify a distance metric for all routes within an area. The
range is from 1 to 255. The default is 110.
external dist3 = 110
inter-area dist2 = 110
intra-area dist1 = 110
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1171