Multiple Spanning Tree Protocol (Mstp); Debug Spanning-Tree Mstp - Dell S4810 Reference Manual

Multiple Spanning Tree Protocol (MSTP)

Multiple spanning tree protocol (MSTP), as implemented by the Dell Networking operating system,
conforms to IEEE 802.1s.
This command supports the Dell Networking S4810 platform.

debug spanning-tree mstp

Enable debugging of the multiple spanning tree protocol and view information on the protocol.
S4810
Syntax
debug spanning-tree mstp [all | bpdu interface {in | out} |
events]
To disable debugging, enter no debug spanning-tree mstp
Parameters
all
bpdu
interface {in
| out}
events
Multiple Spanning Tree Protocol (MSTP)
(OPTIONAL) Enter the keyword all to debug all spanning
tree operations.
(OPTIONAL) Enter the keyword bpdu to debug bridge
protocol data units (BPDU).
(OPTIONAL) Enter the interface keyword along with the type
slot/port of the interface you want displayed. Type slot/port
options are the following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Optionally, enter an in or out parameter with the optional
interface:
• For Receive, enter the keyword in.
• For Transmit, enter the keyword out.
(OPTIONAL) Enter the keyword events to debug MSTP
events.
37
1125