Enabling Giant-Frame Statistics Function; Displaying Basic Port Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
When you use the display interface interface-type interface-number command to
display the information of a port, the system performs statistical analysis on the traffic
flow passing through the port during the specified interval and displays the average
rates in the interval. For example, if you set this interval to 100 seconds, the displayed
information is as follows:
Last 100 seconds input:
Last 100 seconds output:
Table 1-13 Set the interval to perform statistical analysis on port traffic
Enter system view
Enter Ethernet port view
Set the interval to perform
statistical analysis on port
traffic

1.2.12 Enabling Giant-Frame Statistics Function

The giant-frame statistics function is used to ensure transmission of network traffic and
to facilitate statistics and analysis of unusual traffic on the network.
Table 1-14 Enable the giant-frame statistics function
Enter system view
Enable the giant-frame
statistics function

1.2.13 Displaying Basic Port Configuration

After the above configurations, you can execute the display commands in any view to
display information about Ethernet ports, so as to verify your configurations.
You can execute the reset counters command in user view to clear the statistics of
Ethernet ports.
0 packets/sec 0 bytes/sec
Operation
Operation
system-view
giant-frame statistics enable
Huawei Technologies Proprietary
0 packets/sec 0 bytes/sec
Command
system-view
interface interface-type
interface-number
flow-interval interval
Command
1-11
Chapter 1 Port Basic Configuration
Description
—
—
Optional
By default, this
interval is 300
seconds.
Description
—
Optional
By default,
giant-frame
function is
enabled.
the
statistics
not