Huawei Quidway S3900 Series Operation Manual page 84

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway-Vlan-interface1] ip address 10.153.17.82 255.255.255.0
2) Configure the user name and the password for the Web-based network
management system.
Add a WEB user account for the switch, setting the user level to level 3 (the
administration level).
# Configure the user name to be admin.
[Quidway] local-user admin
# Set the user level to level 3.
[Quidway-luser-admin] service-type telnet level 3
# Set the password to admin.
[Quidway-luser-admin] password simple admin
Configure a static route from the switch to the gateway, assuming that the IP
address of the gateway is 192.168.0.50.
[Quidway] ip route-static ip-address 0.0.0.0 255.255.255.255 192.168.0.50
3) Establish an HTTP connection between your PC and the switch, as shown in the
following figure.
Sw itch Sw itch Sw itch Sw itch
PC PC PC PC
PC PC PC PC
Figure 5-3 Establish an HTTP connection between your PC and the switch
4) Log into the switch through IE. Launch IE on the Web-based network
management terminal (your PC) and enter the IP address of the management
VLAN interface of the switch (here it is http://10.153.17.82) in the address bar.
(Make sure the route between the Web-based network management terminal and
the switch is available.)
HTTP Connection HTTP Connection HTTP Connection HTTP Connection
HTTP connection HTTP Connection HTTP connection HTTP Connection
Huawei Technologies Proprietary
5-3
Chapter 5 Logging in through Web-based
Network Management System