Ssh Client Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual - SSH Terminal Services
Quidway S3900 Series Ethernet Switches-Release 1510
Table 1-8 Specify source IP address for sending traffic packets
Enter system view
Specify source IP address
for SSH Server.
Specify source interface
for SSH server

1.1.3 SSH Client Configuration

I. Configuring SSH client
Create the connection between SSH client and server.
Allocate a public key to the server.
Configure the client to run the initial authentication.
The following table describes SSH configuration tasks.
Table 1-9 Configure SSH client
Operation
Enter system view
Create
connection
between SSH client
and server
Allocate a public
key to the server
Configure the client
to run the initial
authentication
Operation
system-view
ssh-server source-ip ip-address
ssh-server
interface-type interface-number
system-view
ssh2 { host-ip | host-name }
[ port-num
{
dh_exchange_group
the
[ prefer_ctos_cipher { des |
aes128 } ] [ prefer_stoc_cipher
{ des
[ prefer_ctos_hmac { sha1 |
sha1_96 | md5 | md5_96 } ]
[ prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ]
ssh client server-ip assign
rsa-key keyname
ssh client first-time enable
Huawei Technologies Proprietary
Chapter 1 SSH Terminal Services
Command
source-interface
Command
] [ prefer_kex
dh_group1 |
} ]
| aes128 } ]
1-10
Description
—
Optional
Optional
Description
—
Required
You can use
command to enable the
connection between SSH
client and server, define
key exchange algorithm
preference, encryption
algorithm preference and
HMAC algorithm
preference between the
server and client.
Required
You can specify on the
client the public key for
the server to
connected to guarantee
the client can
connected to a reliable
server.
Optional
By default, the client runs
the initial authentication.
this
be
be