Huawei Quidway S3900 Series Operation Manual page 272

Operation Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510
1.6.2 Digest Snooping Configuration
Configure the digest snooping feature on a switch to enable it to interwork with other
switches that adopt proprietary protocols to calculate configuration digests in the same
MST region through MSTIs.
I. Prerequisites
The switch to be configured is connected to a partner's switch that adopts a proprietary
spanning tree protocol. The MSTP network operates normally.
II. Configuration procedure
Table 1-36 Configure the digest snooping feature
Operation
Enter system view
Enter
view
Enable
snooping feature
Return to system view
Enable
snooping
globally
Verify
configuration
system-view
Ethernet port
interface
interface-number
the digest
stp
config-digest-snooping
Quit
the digest
stp
feature
config-digest-snooping
the above
display
current-configuration
Huawei Technologies Proprietary
Command
interface-type
1-38
Chapter 1 MSTP Configuration
Description
—
—
Required
The digest snooping feature
is disabled on the port by
default.
—
Required
The digest snooping feature
is disabled globally
default.
You can execute
command in any view.
by
this