Pim-Sm Configuration; Configuring Bsr/Rp - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Caution:
If you configure basic ACLs, the source address match is performed on all the
received multicast packets. The packets failing to match are discarded.
If you configure advanced ACLs, the source address and group address match is
performed on all the received multicast packets. The packets failing to match are
discarded.

7.4 PIM-SM Configuration

PIM-SM configuration includes:
Table 7-7 Configuration tasks
Configure filtering policies for
multicast sources/groups
Configure BSR/RP
Configure PIM-SM domain
boundary
Filter the registration packets
from RP to DR
7.4.1 Configuring Filtering Policies for Multicast Source/Group
For the configuration of filtering policies for multicast source/group, refer to 7.3
PIM-DM Configuration.

7.4.2 Configuring BSR/RP

Table 7-8 Configure BSR/RP
Enter system view
Enable
routing protocol
Enter PIM view
Operation
Operation
system-view
the multicast multicast
routing-enable
pim
Huawei Technologies Proprietary
Description
Section 7.4.1 Configuring Filtering
Optional
Policies for Multicast Source/Group
Optional Section 7.4.2 Configuring BSR/RP
Section 7.4.3 Configuring PIM-SM
Optional
Domain Boundary
Section
Optional
Registration Packets from RP to DR
Command
—
Required
—
7-14
Chapter 7 PIM Configuration
Section
7.4.4 Filtering
Description
the