Huawei Quidway S3900 Series Operation Manual page 755

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510
[aaa_0.Quidway-cluster]
# Add the attached two switches to the cluster.
[aaa_0.Quidway-cluster] add-member 1 mac-address 00e0-fc01-0011
[aaa_0.Quidway-cluster] add-member 17 mac-address 00e0-fc01-0012
# Configure the holdtime of the member device information to be 100 seconds.
[aaa_0.Quidway-cluster] holdtime 100
# Configure the interval to send handshake packets to be 10 seconds.
[aaa_0.Quidway-cluster] timer 10
# Configure the FTP Server, TFTP Server, Log host and SNMP host for the cluster.
[huawei_0.Quidway-cluster] ftp-server 63.172.55.1
[huawei_0.Quidway-cluster] tftp-server 63.172.55.1
[huawei_0.Quidway-cluster] logging-host 69.172.55.4
[huawei_0.Quidway-cluster] snmp-host 69.172.55.4
3) Configure the member devices (taking one member as an example)
Add the devices connected to the management device into the cluster and perform the
following configuration on the member device.
# Connect the member device to the public remote FTP server of the cluster.
<aaa_1.Quidway> ftp cluster
# Download the file named aaa.txt from the public TFTP server of the cluster to the
member device.
<aaa_1.Quidway> tftp cluster get aaa.txt
# Upload the file named bbb.txt from the member device to the public TFTP server of
the cluster.
<aaa_1.Quidway> tftp cluster put bbb.txt
Huawei Technologies Proprietary
1-19
Chapter 1 Cluster