Configuring Igmp Proxy - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Enter Ethernet port view
Configure router ports to
join a multicast group

6.2.5 Configuring IGMP Proxy

I. Configure IGMP Proxy
You can configure IGMP proxy to reduce the workload of configuration and
management of leaf networks without affecting the multicast connections of the leaf
network.
After the configuration of IGMP Proxy on the Layer 3 switch of the leaf network, the leaf
Layer 3 switch is just a host for the external network. Only when the Layer 3 switch has
directly connected members, can it receive the multicast data of corresponding groups.
Table 6-6 Configure IGMP Proxy
Enter system view
Enable
routing protocol
Enter
(which is connected to the
external network) view
Enable the IGMP protocol
Configure IGMP Proxy
The IGMP Proxy feature is disabled by default.
interface
interface-number
igmp
group-address
vlan-id
Operation
system-view
the multicast
multicast
routing-enable
VLAN interface
interface Vlan-interface
interface-number
igmp enable
igmp
Vlan-interface
interface-number
Huawei Technologies Proprietary
Command
interface-type
host-join
vlan
Command
proxy
6-12
Chapter 6 IGMP Configuration
Description
—
Optional
By default, the router port
does not join in any
multicast group.
Description
—
Required
—
Required
Required