Huawei Quidway S3900 Series Operation Manual page 716

Operation Manual – Mirroring
Quidway S3900 Series Ethernet Switches
III. Configuring RSPAN on the intermediate switch
Table 1-10 Configure RSPAN on the intermediate switch
Operation
Enter system view
Create a remote-probe
VLAN and enter VLAN
view
Define
VLAN
remote-probe VLAN
Exit current view
Enter
view of Trunk port
through
intermediate switch is
connected
source
destination switch or
another
switch
Configure Trunk port to
permit packets from
the
VLAN
IV. Configuring RSPAN on the destination switch
Table 1-11 Configure RSPAN on the destination switch
Operation
Enter system view
Create a remote-probe
VLAN and enter VLAN
view
Define
VLAN
remote-probe VLAN
Exit the current view
system-view
vlan vlan-id
the current
as a remote-probe vlan enable
quit
Ethernet port
which the
interface
to the
interface-number
switch,
intermediate
port
remote-probe remote-probe-vlan-id
system-view
vlan vlan-id
the current
as a remote-probe vlan enable
quit
Huawei Technologies Proprietary
Chapter 1 Mirroring Configuration
Command
interface-type
trunk permit vlan
Command
1-12
Description
—
vlan-id is the ID of the
remote-probe VLAN.
Required
—
—
Required
This configuration is
necessary for ports on
the intermediate switch
that are connected to
the source switch or
the destination switch.
Description
—
vlan-id is the ID of the
remote-probe VLAN.
Required
—