Configuring Netbios Services For Dhcp Clients - Huawei Quidway S3900 Series Operation Manual

Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Table 2-16 Configure DNS services for the DHCP server
Operation
Enter system view
Configure
a domain
name for
DHCP
clients
Configure
DNS
server
addresses
for DHCP
clients

2.3.6 Configuring NetBIOS Services for DHCP Clients

For Microsoft Windows-based DHCP clients that communicate through NetBIOS
protocol, the host name-to-IP address translation is carried out by WINS servers. So
you need to perform WINS-related configuration for most Windows-based hosts.
Currently, you can configure up to eight WINS addresses for a DHCP address pool.
Host name-to-IP address mappings are needed for DHCP clients communicating
through the NetBIOS protocol. According to the way to establish the mapping,
NetBIOS nodes fall into the following four categories:
system-view
interface
interface-number
Configure
the current dhcp server domain-name
interface domain-name
quit
dhcp server domain-name
Configure
domain-name
multiple interface-type
interfaces in interface-number
system view interface-type
interface-number ] | all }
interface
interface-number
Configure
the current
dhcp
interface ip-address&<1-8>
quit
dhcp
Configure ip-address&<1-8> { interface
multiple interface-type
interfaces in interface-number
system view interface-type
interface-number ] | all }
Huawei Technologies Proprietary
2-20
Chapter 2 DHCP Server Configuration
Command
interface-type
{ interface
[ to
interface-type
server dns-list
server dns-list
[ to
Description
—
Required
By default, no domain
name is configured for
DHCP clients
Required
By default, no DNS
server address is
configured.