Configuring Ospf To Import External Routes - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

4.6.7 Configuring OSPF to Import External Routes

Table 4-13 Configure OSPF to import external routes
Enter system view
Enter OSPF view
Enable OSPF to import
routes of other protocols
Enable
advertised routes
Enable OSPF to import the
default route
Configure the default cost
for OSPF to import external
routes
Configure
maximum
external routes imported by
OSPF per unit time.
Configure the default tag
for OSPF to import external
routes
Configure the default type
of external
OSPF will import
Operation
OSPF to filter
the default
number of
routes that
Huawei Technologies Proprietary
Command
system-view
ospf [ process-id
[ router-id router-id ] ]
import-route protocol
[ cost value | type value |
tag value | route-policy
route-policy-name ]*
filter-policy { acl-number
| ip-prefix
ip-prefix-name } export
[ routing-protocol ]
default-route-advertise
[ always | cost value |
type type-value
route-policy
route-policy-name ]*
default cost value
default limit routes
default tag tag
default type { 1 | 2 }
4-19
Chapter 4 OSPF Configuration
Description
—
Required
Required
By default, OSPF does
not import the routing
information of
protocols.
Optional
By default, OSPF does
not filter advertised
routes.
Optional
By default, OSPF does
|
not import the default
route.
Optional
By default, the cost for
OSPF to import external
routes is 1.
Optional
By default, a maximum of
1000 routes can
imported.
Optional
The default tag is 1 if it is
not set by using this
command.
Optional
By default, the type of
imported external routes
is Type-2.
other
be