Huawei Quidway S3900 Series Operation Manual page 694

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Add priority remark
actions
Quit current view
Enter Ethernet port
view
Configure
application mode of
QoS profile on the
current
port-based
Display
configurations of QoS
profiles
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in Table 1-9.
Note:
If a QoS profile has been applied on a port, the switch does not allow your deletion of
this QoS profile.
2.3.3 Configuration Example
I. Network requirements
The switch implements the QoS profile function for the access users.
Command
traffic-priority { inbound |
outbound
{ { dscp dscp-value |
ip-precedence { pre-value
| from-cos } } | cos
{ pre-value | from-ipprec }
| local-precedence
pre-value }*
quit
interface
interface-number
the
qos-profile port-based
port to
display qos-profile { all |
the name
interface
interface-number | user
user-name }
Huawei Technologies Proprietary
2-3
Chapter 2 QoS Profile Configuration
} acl-rule
Optional
—
interface-type
—
By default, the application
mode of QoS profile is
user-based.
Optional
profile-name |
interface-type
You can execute the display
command in any view
Description
If MAC-address-based
authentication
configured in 802.1x, the
application mode of QoS
profile must
user-based.
If port-based
authentication
configured in 802.1x, the
application mode of QoS
profile must
port-based.
is
be
is
be