Configuring A Voice Vlan To Operate In Manual Mode - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510

1.2.3 Configuring a voice VLAN to operate in manual mode

Table 1-4 Configure a voice VLAN to operate in manual mode
Enter system view
Enter port view
Enable
function for the port
Set voice VLAN operation
mode to manual mode
Quit to system view
Add a
port in
manua
l mode
to the
voice
VLAN
Quit to system view
Set an OUI address to be one
that can be identified by the
voice VLAN
Operation
the voice VLAN
Enter
VLAN
view
Access
port
Add the
port to the
VLAN
Enter port
view
Add the
port to the
Trunk voice
or VLAN
Hybrid
Configure
port
the voice
VLAN to
be the
default
VLAN of
the port
Huawei Technologies Proprietary
Chapter 1 Voice VLAN Configuration
Command
system-view
interface interface-type
interface-number
voice vlan enable
undo voice vlan mode auto
quit
vlan vlan-id
port interface-list
interface interface-type
interface-num
port trunk permit
vlan-id
port hybrid vlan vlan-id
{ tagged | untagged }
port trunk pvid vlan vlan-id
port hybrid pvid
vlan-id
quit
voice vlan mac-address
oui mask oui-mask
[ description text ]
1-6
Description
—
Required
Required
By default,
voice VLAN
function is disabled
on a port.
Required
The default voice
VLAN operation
mode is automatic
mode.
—
Required
vlan
Optional
Refer to Table 1-2
to determine
vlan
whether or not this
operation
needed.
—
Optional
If you do not set
the address, the
default
address is used.
the
is
OUI