Configuration Example: A Switch Operating As An Ftp Server - Huawei Quidway S3900 Series Operation Manual

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
If you attempt to disconnect a user that is uploading/downloading data to/from the FTP
server that is acted by an S3900, the S3900 will disconnect the user after the data
transmission is completed.
V. Displaying FTP server information
After the above configurations, you can run the display command in any view to
display the running information of the FTP server and verify your configurations.
Table 1-6 Display FTP server information
Operation
Display the information
about
configurations on a switch
Display the source IP
address set for an FTP
server
Display the login FTP
clients on an FTP server

1.1.3 Configuration Example: A Switch Operating as an FTP Server

I. Network requirements
A switch operates as an FTP server and a remote PC as an FTP client.
Create a user account on the FTP server with the user name "switch" and
password "hello".
Configure the IP address 1.1.1.1 for a VLAN interface on the switch, and 2.2.2.2
for the PC. Ensure the route between the two is reachable.
The switch application named switch.bin is stored on the PC. Upload it to the FTP
server through FTP to upgrade the application of the switch, and download the switch
configuration file named vrpcfg.cfg from the switch to backup the configuration file.
FTP server display ftp-server
display
source-ip
display ftp-user
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Command
ftp-server
1-6
Description
These commands can be
executed in any view.