Enabling Information Output To The Trap Buffer - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Define
information source
Set the format of
time stamp
Note:
To view debugging information of specific modules, you need to set the information
type as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.

1.2.6 Enabling Information Output to the Trap Buffer

Table 1-11 lists the related configurations on the switch.
Table 1-11 Enable information output to the trap buffer
Operation
Enter system view
Enable
information center
Enable information
output to the trap
buffer
Define
information source
Command
info-center
{ modu-name | default }
an channel { channel-number |
channel-name } [ { log | trap
| debug } { level severity |
state state } ]*
info-center
{ log | trap | debugging }
{ boot | date | none }
Command
system-view
the
info-center enable
info-center trapbuffer [channel
{ channel-number | channel-name }
| size buffersize]*
info-center source { modu-name |
default
an
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
Huawei Technologies Proprietary
1-12
Chapter 1 Information Center
source
Required
Optional
This is to set the time stamp
timestamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.
—
Optional
By
information center is
enabled.
Optional
By default, the switch
uses
channel 3 to output trap
information to the trap
buffer, which can holds
up to 256 items by
default.
} channel
Required
Description
Description
default, the
information