Chapter 3 Logging In Through Telnet - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510

Chapter 3 Logging in through Telnet

3.1 Introduction
You can manage and maintain a switch remotely by Telneting to the switch. To achieve
this, you need to configure both the switch and the Telnet terminal accordingly.
Table 3-1 Requirements for Telnet to a switch
Switch
Telnet terminal
3.1.1 Common Configuration
Table 3-2 lists the common Telnet configuration.
Item
The management VLAN of the switch is created and the
route between the switch and the Telnet terminal is
available. (Refer to the Management VLAN Configuration
module for more.)
The authentication mode and other settings are
configured. Refer to Table 3-2 and Table 3-3.
Telnet is running.
The IP address of the management VLAN of the switch is
available.
Huawei Technologies Proprietary
Chapter 3 Logging in through Telnet
Requirement
3-1