Huawei Quidway S3900 Series Operation Manual page 785

Operation Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510
1.3.1 Configuration Prerequisites
Complete SNMP basic configuration.
1.3.2 Configuration Tasks
Table 1-4 Configure Trap
Enter system view
Enable the device to
send Trap packets
Enable
the port
to send
Trap
packets
Set Trap target host
address
Set the source address
to send Trap packets
Set the
queue length of Trap
packet
destination host
Set aging time for Trap
packets
Operation
system-view
snmp-agent
[ configuration | flash | ospf
[ process-id ] [ ospf-trap-list ] |
standard
coldstart | linkdown | linkup |
warmstart
[ authfailure | newmaster ] ]
Enter port
interface
view or
interface-number
interface view
Enable the
port or
interface to
enable snmp trap updown
send Trap
packets
Quit to
quit
system view
snmp-agent
address udp-domain { ip-address }
[ udp-port port-number ] params
securityname security-string [ v1 |
v2c | v3 {authentication | privacy } ]
snmp-agent
interface-type interface-number
information
snmp-agent trap queue-size size
sent to
snmp-agent trap life seconds
Huawei Technologies Proprietary
Command
trap
[ authentication
]* | system
interface-type
target-host
trap
1-7
Chapter 1 SNMP Configuration
Description
—
enable
|
| vrrp
Optional
By default, the
port is enabled
to send Trap
packets.
trap
Required
source
Optional
Optional
The default
value is 100.
Optional
The default
aging time for
Trap packets is
120 seconds.