Controlling Web Users By Source Ip Addresses; Disconnecting A Web User By Force - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510

8.4.2 Controlling Web Users by Source IP Addresses

Controlling Web users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.
Table 8-6 Control Web users by source IP addresses
Operation
Enter system view
Create a basic ACL
or enter basic ACL
view
Define rules for the
ACL
Quit to
view
Apply the ACL to
control Web users

8.4.3 Disconnecting a Web User by Force

The administrator can disconnect a Web user by force using the related command.
Table 8-7 Disconnect a Web user by force
Operation
Disconnect a Web
user by force
8.4.4 Configuration Example
I. Network requirements
Only the users sourced from the IP address of 10.110.100.46 are permitted to access
the switch.
Command
system-view
acl number
[ match-order { config |
auto } ]
rule [ rule-id ] { permit |
deny } [ source { sour-addr
sour-wildcard | any } ]
[ time-range time-name ]
[ fragment ]
system
quit
ip http acl acl-number
Command
free web-users
user-id userid | user-name
username }
Huawei Technologies Proprietary
8-8
—
As for
acl-number
command,
keyword
default.
Required
—
Optional
Required
{ all |
Execute this command in user
view.
Chapter 8 User Control
Description
the acl number
the config
is specified by
Description