Configuring Interaction For The Cluster; Configuring Nm Interface For The Cluster - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510
II. Building a cluster automatically
Table 1-9 Enable the cluster function automatically
Operation
Enter system view
Enter cluster view
Configure the rang
e of
addresses of the
cluster
Build
automatically

1.2.8 Configuring Interaction for the Cluster

Table 1-10 Configure interaction for the cluster
Operation
Enter system view
Enter cluster view
Configure
public FTP server
for the cluster
Configure
TFTP server for the
cluster
Configure
logging host for the
cluster
Configure
SNMP host for the
cluster

1.2.9 Configuring NM Interface for the Cluster

I. Configuration prerequisites
The switches in the cluster are connected correctly;
The internal server is correctly connected to the management switch.
system-view
cluster
ip-pool
the IP
administrator-ip-address
{ ip-mask | ip-mask-length }
a cluster
auto-build [ recover ]
system-view
cluster
the
ftp-server ip-address
the
tftp-server ip-address
the
logging-host ip-address
the
snmp-host ip-address
Huawei Technologies Proprietary
Command
Command
1-11
Chapter 1 Cluster
Description
—
—
Required
Optional
You can build
according to corresponding
prompts
Description
—
Required
Optional
Optional
Optional
Optional
clusters