Huawei Quidway S3900 Series Operation Manual page 95

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Quit to
view
Apply
while
the
community name
Apply
while
the SNMP group
name
Note:
You can specify different ACLs while configuring the SNMP community name, and the
SNMP group name.
As SNMP community name is a feature of SNMPv1 and SNMPv2c, the specified ACLs
in the command that configures SNMP community names (the snmp-agent
community command) take effect in the network management systems that adopt
SNMPv1 or SNMPv2c.
Similarly, as SNMP group name is a feature of SNMPv2c and the higher SNMP
versions, the specified ACLs in the commands that configure SNMP group names take
effect in the network management systems that adopt SNMPv2c or higher SNMP
versions. If you specify ACLs in the commands, the network management users are
filtered by the SNMP group name.
8.3.3 Configuration Example
I. Network requirements
Only SNMP users sourced from the IP addresses of 10.110.100.52 and 10.110.100.46
are permitted to access the switch.
system
quit
snmp-agent
the ACL
{ read
configuring
community-name
SNMP
[ [ mib-view view-name ] |
[ acl acl-number ] ]*
snmp-agent group { v1 |
v2c
[ read-view
[ write-view write-view ]
[ notify-view notify-view ]
the ACL
[ acl acl-number ]
configuring
snmp-agent
group-name
[ authentication | privacy ]
[ read-view
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
Huawei Technologies Proprietary
Command
community
| write }
} group-name
read-view ]
group v3
read-view ]
8-6
Chapter 8 User Control
Description
—
Optional
By default, SNMPv1 and
SNMPv2c use community
name to access.
Optional
By default, the authentication
mode and the encryption
mode are configured as none
for the group.