Port Binding Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510
Table 2-2 Display port binding configuration
Operation
Display
information
port binding

2.3 Port Binding Configuration Example

I. Network requirements
In order o prevent illegal use of the IP address of PC1, you may bind the MAC and IP
addresses to Ethernet1/0/1.
II. Network diagram
Switch A Switch A Switch A Switch A
Figure 2-1 Network diagram for port binding configuration
III. Configuration procedure
Configure switch A as follows:
# Enter system view.
<Quidway> system-view
# Enter Ethernet1/0/1 port view.
[Quidway] interface Ethernet1/0/1
# Bind the MAC address and the IP address of PC1 to Ethernet1/0/1.
[Quidway-Ethernet1/0/1]
10.12.1.1
Command
display am
the
[ interface
about
interface-number
mac-addr | ip-addr ]
E1/0/1 E1/0/1
PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1 PC1
MAC: 0001 -0002 -0003 MAC: 0001 -0002 -0003 MAC: 0001 -0002 -0003 MAC: 0001 -0002 -0003
IP Address: 10.12.1.1 IP Address: 10.12.1.1 IP Address: 10.12.1.1 IP Address: 10.12.1.1
am user-bind
Huawei Technologies Proprietary
2-2
Chapter 2 Port Binding Configuration
user-bind
interface-type The display command can be
| executed in any view.
Switch B Switch B Switch B Switch B
PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2 PC2
mac-addr 0001-0002-0003
Description
ip-addr