Configuring Igmp Version; Configuring Igmp Query Packets - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Configure router ports to
join
multicast group
Configure IGMP Proxy
Remove the joined IGMP
groups from the interface

6.2.1 Configuring IGMP Version

Table 6-2 Configure IGMP version
Operation
Enter system view
Enable
routing protocol
Enter
view
Enable
current interface
Configure
version of the Layer 3
switch (router)
Caution:
Each IGMP version cannot be switched to each other automatically. So all the Layer 3
switches on a subnet must be configured to use the same IGMP version.

6.2.2 Configuring IGMP Query Packets

I. IGMP general query packets
The Layer 3 switch sends IGMP general query packets to the connected network
segment periodically to get to know which multicast groups in the network segment
have members according to the returned IGMP report packets. The multicast router
Description
the specified Optional
Optional
Optional
system-view
the multicast multicast
routing-enable
VLAN interface interface Vlan-interface
interface-number
IGMP on the
igmp enable
the IGMP
igmp version { 1 | 2 }
Huawei Technologies Proprietary
Section 6.2.4
Ports to Join the Specified Multicast
Group
Section 6.2.5
Proxy
Section 6.2.6 Removing the Joined
IGMP Groups from the Interface
Command
6-6
Chapter 6 IGMP Configuration
Related section
Configuring Router
Configuring IGMP
Description
—
Enable the multicast
routing protocol
—
Required
IGMP is disabled on the
interface by default.
Optional
IGMP version 2 is used by
default.