Huawei Quidway S3900 Series Operation Manual page 863

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Table 1-4 Specify the source interface and source IP address for an FTP server
Operation
Enter system view
Specify
interface
server
Specifying
interface
server
Note:
The specified interface must be an existing one, and otherwise a prompt appears to
show the configuration fails.
The value of argument ip-address must be an IP address on the device where the
configuration is performed, and otherwise a prompt appears to show the
configuration fails.
You may specify only one source interface or source IP address for the FTP at one
time. That is, only one of the commands source-interface and ftp-server
source-ip can be valid at one time. If you execute both of them, the new setting will
overwrite the original one.
IV. Disconnecting a specified user
On the FTP server, you can disconnect a specified user from the FTP server to secure
the network.
Table 1-5 Disconnect a specified user
Enter system view
On the
disconnect
user from the FTP server
system-view
ftp-server
the source
source-interface
for an FTP
interface-type
interface-number
the source
ftp-server
for an FTP
ip-address
Operation
system-view
FTP server,
a specified
ftp disconnect user-name
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Command
source-ip
Command
1-5
Description
—
Optional
Optional
Description
—
Required