Huawei Quidway S3900 Series Operation Manual page 17

Operation Manual – Overview
Quidway S3900 Series Ethernet Switches-Release 1510
Part
4 VLAN
5 IP Address and
Performance
Configuration
6 Management
VLAN
7 Voice VLAN
8 GVRP
9 Port
Configuration
10
Aggregation
11 Port Isolation
12
Security&Port
Binding
13 DLDP
14 MAC Address
Table
15 Auto Detect
16 MSTP
17
Protocols.
18 Multicast
IEEE 802.1Q-compliant VLAN
Port-based VLAN
Protocol-based VLAN
Configuring an IP address for a switch
Configuring the TCP attributes for a switch
Management VLAN configuration
Management VLAN interface configuration
Voice VLAN
GARP VLAN registration protocol (GVRP)
Three port states supported: Access, Trunk, and Hybrid
Setting broadcast storm suppression globally
Basic
Loopback detection supported
Cable test
Link
Link aggregation control protocol (LACP)
Port isolation group
Port
Multiple security modes
MAC address-to-port binding
Device link detection protocol (DLDP)
Manually configuring dynamic, static, and black hole MAC
addresses
Configuring the aging time for MAC addresses
MAC address learning limit
Auto detect
Auto detect applications in static routing, VRRP, and VLAN
interface backup
STP/RSTP/MSTP
QinQ BPDU tunnel
Huawei-3Com-proprietary MSTP path cost standard
Static route
Routing information protocol (RIP) v1/v2
Routing
Open shortest path first (OSPF) (S3900-EI series switches
only)
Routing policy
Internet group management protocol snooping (IGMP
Snooping)
Internet group management protocol (IGMP) (S3900-EI
series switches only)
Protocol-independent multicast-dense mode (PIM-DM)
(S3900-EI series switches only)
Protocol-independent multicast-sparse mode (PIM-SM)
(S3900-EI series switches only)
Huawei Technologies Proprietary
Features
3-3
Chapter 3 Product Overview