Scheduling A Reboot On The Switch; Specifying The App To Be Adopted At Reboot - Huawei Quidway S3900 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
When rebooting, the system checks whether there is any configuration change. If there
is, it prompts you to indicate whether or not to proceed. This prevents you from losing
your original configuration due to oblivion after system reboot.

4.2.3 Scheduling a Reboot on the Switch

After you schedule a reboot on the switch, the switch will reboot at the specified time.
Table 4-3 Schedule a reboot on the switch
Operation
Schedule a reboot
on the switch, and
set the reboot date
and time
Schedule a reboot
on the switch, and
set the
waiting delay
Enter system view
Schedule a reboot
on the switch, and
set the reboot period
Note:
There is at most one minute defer for scheduled reboot, that is, the switch will reboot
within one minute after reaching the specified reboot date and time.

4.2.4 Specifying the APP to be Adopted at Reboot

APP is the host software of the switch. If multiple APPs exist in the Flash memory, you
can use the command here to specify the one that will be adopted when the switch
reboots.
Perform the following configuration in user view:
schedule
[ mm/dd/yyyy | yyyy/mm/dd ]
schedule reboot delay { hh:mm |
reboot mm }
system-view
schedule reboot
hh:mm period
Huawei Technologies Proprietary
4-2
Chapter 4 Device Management
Command
reboot at hh:mm
regularity
Description
Optional
Optional
—
at
Optional