Rip Configuration Tasks - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

3.2 RIP Configuration Tasks

Table 3-1 RIP configuration tasks
Basic RIP configuration
RIP route control
RIP network adjustment and
optimization
Displaying and maintaining RIP configuration
Configuration task
Enabling RIP globally and
on the interface of a
specified
segment
Setting the RIP operating
status on an interface
Specifying
version on an interface
Setting
routing
interface
Configuring
summary
Disabling the receiving of
host routes
Configuring RIP to filter
incoming/outgoing routes
Setting RIP preference
Enabling
sharing
Configuring RIP to import
routes
protocol
Configuring RIP timers
Configuring split horizon
Configuring RIP-1 packet
zero field check
Setting
authentication mode
Configuring
neighbor
Huawei Technologies Proprietary
3-3
Chapter 3 RIP Configuration
Description
Required
network
—
the RIP
—
the additional
metrics of an Optional
RIP route
Optional
Optional
Optional
Optional
RIP traffic
Optional
from another
Optional
Optional
Optional
Optional
RIP-2 packet
Optional
a RIP
Optional
Optional
Related
section
3.3.2 I.
3.3.2 II.
3.3.2 III.
3.4.2 I.
3.4.2 II.
3.4.2 III.
3.4.2 IV.
3.4.2 V.
3.4.2 VI.
3.4.2
VII.
3.5.2 I.
3.5.2 II.
0
3.5.2 IV.
3.5.2 V.
3.6