Huawei Quidway S3900 Series Operation Manual page 869

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Specify the source IP
address so that the FTP
client uses it to connect
with an FTP server for the
next time
Enter system view
Specify
interface so that the FTP
client always uses it to
connect
server
Specify the source IP
address so that the FTP
client always uses it to
connect
server
Display the source IP
address so that the FTP
client always uses it to
connect
server
Note:
The specified interface must be an existing one, and otherwise a prompt appears to
show the configuration fails.
The value of argument ip-address must be the IP address of the device where the
configuration is performed, and otherwise a prompt appears to show the
configuration fails.
The latest connection setting is prior to the fixed setting. That is, if you specify the
source IP address or source interface that the FTP client uses to connect with an
FTP server, and the IP address or interface is different from that the FTP client
always uses to connect to an FTP server, the former will be used for the next
connection.
Only one of the source interface or source IP address can be set for the FTP client
at one time. That is, only one of the commands source-interface and ftp-server
source-ip can be effective at one time. If you execute both of them, the new setting
will overwrite the original one.
Operation
ftp { cluster | remote-server }
source-ip ip-address
system-view
the source
ftp
interface-type
with an FTP interface-number
ftp source-ip ip-address
with an FTP
display ftp source-ip
with an FTP
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Command
source-interface
1-11
Description
Optional
—
Optional
Optional
This command can be
executed in any view.