Configuration Procedure Of Tp - Huawei Quidway S3900 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
1.8.1 Configuration Prerequisites
ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
The limit rate for TP, the actions for the packets within the specified traffic and the
actions for the packets beyond the specified traffic have been specified.
The ports that needs this configuration is specified

1.8.2 Configuration Procedure of TP

Table 1-12 Configure TP
Operation
Enter system view
Enter Ethernet port
view
Configure
traffic-based TP
Display the parameter
configurations
traffic policing
Command
system-view
interface
interface-type
interface-number
traffic-limit inbound
acl-rule target-rate
[ exceed action ]
display
qos-interface
of { interface-type
interface-number
unit-id } traffic-limit
Huawei Technologies Proprietary
1-19
Chapter 1 QoS Configuration
Description
—
—
Required
exceed exceed-action: Sets the
actions on the packets exceeding
the specified traffic when the
packet traffic exceeds
specified traffic. The actions
include:
drop: Drops the packets.
remark-dscp
Resets the DSCP precedence
of the packets and forwards
them at the same time.
Optional
You can execute the display
|
command in any view
the
dscp-value: