Updating The Bootrom; Updating The Host Software In The Fabric; Displaying The Device Management Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Table 4-4 Specify the APP to be adopted at reboot
Operation
Specify the APP to
be adopted
reboot

4.2.5 Updating the BootROM

You can use the BootROM application saved in the Flash memory of the switch to
update the running BootROM application. With this command, a remote user can
conveniently update the BootRom by uploading the BootROM to the switch through
FTP and running this command. The BootROM can be used when the switch reboots.
Perform the following configuration in user view:
Table 4-5 Update the BootROM
Operation
Update
BootROM

4.2.6 Updating the Host Software in the Fabric

You can execute the following commands on any device and use a specified host
software to upload all devices in a Fabric, thus to even the software versions in this
Fabric.
Table 4-6 Update the host software in the Fabric
Operation
Update the host software
on the devices in the
Fabric

4.3 Displaying the Device Management Configuration

After the above configurations, you can execute the display command in any view to
display the operating status of the device management to verify the configuration
effects.
Command
boot boot-loader [ backup-attribute ]
at
{ file-url [ fabric ] | device-name }
Command
the boot bootrom
device-name }
Command
update fabric { file-url |
device-name }
Huawei Technologies Proprietary
4-3
Chapter 4 Device Management
Optional
{ file-url |
Optional
Description
Optional
Description
Description