Huawei Quidway S3900 Series Operation Manual page 351

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Configure three static routes and enable OSPF on Switch A.
By configuring route filtering rules on Switch B, make the three received static routes
partially visible and partially shielded: the routes of network segments 20.0.0.0 and
40.0.0.0 are visible, and the route of network segment 30.0.0.0 is shielded.
II. Network diagram
static 20.0.0.0/8 static 20.0.0.0/8 static 20.0.0.0/8 static 20.0.0.0/8
30.0.0.0/8 30.0.0.0/8 30.0.0.0/8 30.0.0.0/8
40.0.0.0/8 40.0.0.0/8 40.0.0.0/8 40.0.0.0/8
Figure 5-1 Filtering received routing information
III. Configuration procedure
Configure Switch A:
# Configure the IP addresses of the interfaces.
<Switch A> system-view
[Switch A] interface vlan-interface 100
[Switch A-Vlan-interface100] ip address 10.0.0.1 255.0.0.0
[Switch A] interface vlan-interface 200
[Switch A-Vlan-interface200] ip address 12.0.0.1 255.0.0.0
[Switch A-Vlan-interface200] quit
# Configure three static routes.
[Switch A] ip route-static 20.0.0.1 255.0.0.0 12.0.0.2
[Switch A] ip route-static 30.0.0.1 255.0.0.0 12.0.0.2
[Switch A] ip route-static 40.0.0.1 255.0.0.0 12.0.0.2
# Enable the OSPF protocol and specify the ID of the area to which the interface
10.0.0.1 belongs.
<Switch A> system-view
[Switch A] router id 1.1.1.1
[Switch A] ospf
[Switch A-ospf-1] area 0
[Switch A-ospf-1-area-0.0.0.0] network 10.0.0.0 0.255.255.255
[Switch A-ospf-1-area-0.0.0.0] quit
[Switch-ospf-1]quit
# Configure an ACL.
[Switch A] acl number 2000
[Switch A-acl-basic-2000] rule deny source 30.0.0.0 0.255.255.255
Router ID: 1.1.1.1 Router ID: 1.1.1.1 Router ID: 1.1.1.1 Router ID: 1.1.1.1
Vlan-interface200 Vlan-interface200 Vlan-interface200 Vlan-interface200
12.0.0.1/8 12.0.0.1/8 12.0.0.1/8 12.0.0.1/8
Switch A Switch A Switch A Switch A
Huawei Technologies Proprietary
Chapter 5 IP Routing Policy Configuration
Vlan -interface100 Vlan -interface100
Vlan-interface100 Vlan-interface100
10.0.0.1/8 10.0.0.1/8 10.0.0.1/8 10.0.0.1/8
Vlan-interface100 Vlan-interface100 Vlan-interface100 Vlan-interface100
10.0.0.2/8 10.0.0.2/8 10.0.0.2/8 10.0.0.2/8
5-8
Area 0 Area 0 area 0 area 0
Router ID: 2.2.2.2 Router ID: 2.2.2.2 Router ID: 2.2.2.2 Router ID: 2.2.2.2
Switch B Switch B Switch B Switch B