Huawei Quidway S3900 Series Operation Manual page 866

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
230 User logged in.
ftp>
# Upload the switch.bin file.
ftp> put switch.bin
200 Port command okay.
150 Opening ASCII mode data connection for switch.bin.
226 Transfer complete.
# Download the vrpcfg.cfg file.
ftp> get vrpcfg.cfg
200 Port command okay.
150 Opening ASCII mode data connection for vrpcfg.cfg.
226 Transfer complete.
ftp: 3980 bytes received in 8.277 seconds 0.48Kbytes/sec.
This example uses the command line window tool provided by Windows. When you log
into the FTP server through another FTP client, refer to the corresponding instructions
for operation description.
Caution:
If available space on the Flash memory of the switch is not enough to hold the file to
be uploaded, you need to delete files from the Flash memory to make room for the
file.
Quidway series switch is not shipped with FTP client applications. You need to
purchase and install it by yourself.
3) After uploading the application, you can update the application on the switch.
# Use the boot boot-loader command to specify the uploaded file (switch.bin) to be
the startup file used when the switch starts the next time, and restart the switch. Thus
the switch application is upgraded.
<Quidway> boot boot-loader switch.app
<Quidway> reboot
Note:
For information about the boot boot-loader command and how to specify the startup
file for a switch, refer to the "System Maintenance and Debugging" module of this
manual.
Huawei Technologies Proprietary
1-8
Chapter 1 FTP and TFTP Configuration