Clearing The Related Pim Entries - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Enter
view
Enable PIM-DM/PIM-SM
on the current interface
Configure limit on the
number of PIM neighbors
on the interface
Configure
policy for PIM neighbors
Caution:
If the number of existing PIM neighbors exceeds the user-defined limit, the existing PIM
neighbors will not be deleted.

7.2.4 Clearing the Related PIM Entries

You can execute the reset command in user view to clear the related statistics about
multicast PIM.
Operation
VLAN interface interface Vlan-interface
interface-number
pim dm / pim sm
pim neighbor-limit limit
the filtering pim
acl-number
Huawei Technologies Proprietary
Command
neighbor-policy
7-12
Chapter 7 PIM Configuration
Description
—
Required
Configure the
protocol type on
interface
Optional
By default, the upper limit
on the number of PIM
neighbors on a interface
is 128
Optional
You can configure to
filter the IP addresses
of some multicast
groups in ACL.
By default, the filtering
policy for neighbors
cannot be enabled on
an interface.
PIM
the