Tftp Lighting Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual - File System Management
Quidway S5100-EI Series Ethernet Switches-Release 1510
Table 2-2 Download file from an FTP server to the switch acting as an FTP client
FTP
server
FTP
client

2.2 TFTP Lighting Configuration

2.2.1 Introduction to TFTP
Trivial file transfer protocol (TFTP) is a simple protocol. Compared with FTP, TFTP
does not provide complex interactive access interface and authentication control, and
is suitable for the environments that do not need complex interaction. Generally, TFTP
is implemented based on UDP.
The TFTP file transfer is initiated by a client:
When a file needs to be downloaded, the client sends a read request to the TFTP
server. It then receives data from the server and sends acknowledgement to the
server.
Operation
Enable FTP server
Configure
authentication/auth
orization of the FTP
server
Log into the remote
FTP server
Download files from
the remote FTP
server and save the
files to the local
device
Huawei Technologies Proprietary
Chapter 2 FTP/TFTP Lighting Configuration
Command
Required
For detailed configuration, refer
—
to the configuration instruction
relevant to FTP server.
Required
For detailed configuration, refer
—
to the configuration instruction
relevant to FTP server.
Required
The switch is an FTP client
by default.
The user should first obtain
an FTP user name and
password, then log into the
ftp
remote FTP server. Only
[ ipaddress
after that, can the user obtain
[ port ] ]
the
corresponding directory and
file.
At the same time the user
logs into the FTP server, the
switch enters FTP client
command view.
Required
If no local file name is specified,
get
the system will consider that the
remotefile
local file name is identical with
[ localfile ]
the file name on the remote FTP
server by default.
2-3
Description
access rights of