Huawei Quidway S3900 Series Operation Manual page 525

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
A RADIUS server with IP address 10.110.91.164 is connected to the switch. This
server will be used as the authentication server.
On the switch, set the shared key that is used to exchange packets with the
authentication RADIUS server to "expert".
You can use a CAMS server as the RADIUS server. If you use a third-party RADIUS
server, you can select standard or huawei as the server type in the RADIUS scheme.
On the RADIUS server:
Set the shared key it uses to exchange packets with the switch to "expert".
Set the port number for authentication.
Add Telnet user names and login passwords.
The Telnet user name added to the RADIUS server must be in the format of
userid@isp-name if you have configure the switch to include domain names in the user
names to be sent to the RADIUS server.
II. Network diagram
Telnet user Telnet user Telnet user Telnet user
Figure 1-7 Remote RADIUS authentication of Telnet users
III. Configuration procedure
# Enter system view.
<Quidway> system-view
[Quidway]
# Adopt AAA authentication for Telnet users.
[Quidway] user-interface vty 0 4
[Quidway-ui-vty0-4] authentication-mode scheme
# Configure an ISP domain.
[Quidway] domain cams
[Quidway-isp-cams] access-limit enable 10
Authentication Server Authentication Server Authentication Server Authentication Server Authentication server Authentication Server Authentication server
IP address: 10.110.91.164 IP address: 10.110.91.164 IP address: 10.110.91.164 IP address: 10.110.91.164 IP address: 10.110.91.164 IP address: 10.110.91.164 IP address: 10.110.91.164
Sw itch Sw itch Sw itch Sw itch Sw itch Sw itch Sw itch
Huawei Technologies Proprietary
1-44
Chapter 1 AAA & RADIUS & HWTACACS
Internet Internet Internet Internet Internet Internet Internet Internet Internet Internet Internet
Configuration