Displaying And Maintaining Gvrp; Gvrp Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – GVRP
Quidway S3900 Series Ethernet Switches-Release 1510
Timer
Leave
LeaveAll

1.3 Displaying and Maintaining GVRP

After the above configuration, you can use the display commands in any view to
display the configuration information and operating status of GVRP/GARP, and thus
verify your configuration. You can use the reset command in user view to clear GARP
statistics.
Table 1-4 Display and maintain GVRP
Display GARP statistics
Display the settings of the
GARP timers
Display GVRP statistics
Display the global GVRP
status
Clear GARP statistics

1.4 GVRP Configuration Example

1.4.1 Network requirements
You need to enable GVRP on the switches to enable dynamic VLAN information
registration and update between the switches.
Lower threshold
This lower threshold
greater than twice the timeout
time of the Join timer. You
can change the threshold by
changing the timeout time of
the Join timer.
This lower threshold
greater than the timeout time
of the Leave timer. You can
change threshold
changing the timeout time of
the Leave timer.
Operation
display
[ interface interface-list ]
display
[ interface interface-list ]
display
[ interface interface-list ]
display gvrp status
reset
[ interface interface-list ]
Huawei Technologies Proprietary
Upper threshold
is
This upper threshold is less than the
timeout time of the LeaveAll timer.
You can change the threshold by
changing the timeout time of the
LeaveAll timer.
is
32,765 centiseconds
by
Command
garp statistics
garp timer
gvrp statistics
garp statistics
1-6
Chapter 1 GVRP Configuration
Description
The display
commands can
executed in any view.
The reset command
can be executed in
user view.
be