Huawei Quidway S3900 Series Operation Manual page 260

Operation Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
MSTP
mode configuration
Timeout time factor
configuration
Maximum transmitting
speed configuration
Edge
configuration
Path
configuration
Port
configuration
Point-to-point
related configuration
Note:
In a network that contains switches with both GVRP and MSTP employed, GVRP
packets are forwarded along the CIST. If you want to broadcast packets of a specific
VLAN through GVRP, be sure to map the VLAN to the CIST when configuring the
MSTP VLAN mapping table (The CIST of a network is the spanning tree instance
numbered 0.)
1.3.1 Prerequisites
The status of the switches in the spanning trees is determined. That is, the status (root,
branch, or leaf) of each switch in each spanning tree instance is determined.
1.3.2 MST Region Configuration
Refer to section 1.2.2 "MST Region Configuration".
1.3.3 MSTP Operation Mode Configuration
Refer to section 1.2.6 "MSTP Operation Mode Configuration".
Remarks
operation
Optional
Optional
Optional
The
recommended.
port
Optional
cost
Optional
priority
Optional
link
Optional
Huawei Technologies Proprietary
1-26
Chapter 1 MSTP Configuration
Section
Operation
Configuration"
Section 1.2.10
Time Factor Configuration"
Section 1.2.11
Transmitting
default is
Configuration"
Section 1.2.12
Configuration"
Section 1.3.7
Configuration"
Section 1.3.8
Configuration"
Section
"Point-to-point
Configuration"
Related section
1.2.6 "MSTP
Mode
"Timeout
"Maximum
Speed
"Edge Port
"Path Cost
"Port Priority
1.2.13
Link-Related