Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510
1.1 Cluster Overview
1.1.1 Introduction to HGMP V2
A cluster is implemented through HGMP V2. By employing huawei group management
protocol (HGMP V2), a network administrator can manage multiple switches using the
public IP address of a switch known as a management device. The switches under the
management of the management device are member devices. The management
device, along with the member devices, forms a cluster. Normally, a cluster member
device is not assigned a public IP address. Management and maintenance operations
intended for the member devices in a cluster are redirected by the management device.
Figure 1-1 illustrates a typical cluster implementation.
Cluster
Cluster
Figure 1-1 Diagram for cluster
HGMP V2 offers the following advantages:
The procedures to configure multiple switches remarkably simplified. When the
management device is assigned a public IP address, you can configure/manage a
specific member device on the management device instead of logging into it in
advance.
Functions of topology discovery and display provided, which assist network
monitoring and debugging
Chapter 1 Cluster
Network Management Device
Network Management Device
Network
Network
Management Devic e
Management Devic e
Member Device
Member Device
Member Device
Member Device
Member Device
Member Device
Huawei Technologies Proprietary
69.110.1.100
69.110.1.100
69.110.1.1
69.110.1.1
1-1
Chapter 1 Cluster
Candidate Device
Candidate Device