Huawei Quidway S3900 Series Operation Manual page 596

Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Configure
assign
addresses
interface DHCP
address pool to
DHCP clients
Configure DNS service for the
DHCP server
Configure NetBIOS service for the
DHCP server
Customize DHCP service
Configure the connection between
the DHCP interface address pool
and the BIMS server
2.3.2 Enabling DHCP
You need to enable DHCP before performing DHCP configurations. DHCP-related
configurations are valid only when DHCP is enabled.
Table 2-12 Enable DHCP
Operation
Enter system view
Enable DHCP
Configuration task
Configure to bind
IP address
to
statically
IP
DHCP clients
of
Configure
assign
addresses
dynamically
system-view
dhcp enable
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Remarks
One among
these two
to options is
required.
These two
to
options can
IP
be configured
at the same
time.
Optional
Optional
Optional
Optional
Command
2-15
Section
2.3.4 "Configuring
Assign IP Addresses of
DHCP Address Pools to
DHCP Clients"
2.3.5 "Configuring DNS
Services for the DHCP
Server"
2.3.6 "Configuring
NetBIOS Services
DHCP Clients"
2.3.7 "Customizing
DHCP Service"
2.3.8 "Configure
Connection Between the
DHCP Interface Address
Pool and the BIMS Server"
Description
—
Required
By default, DHCP is enabled
to
for