Displaying And Maintaining A Cluster - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Remove a member
device
cluster
Reboot a specified
member device
Return to system
view
Return to user view
Switch
the management
device view and a
member
view

1.5 Displaying and Maintaining a Cluster

After the configuration above, you can execute the display command to display the
running status after the cluster configuration. You can verify the configuration effect
through checking the displayed information.
Table 1-17 Display and maintain cluster configurations
Operation
Display the global
NDP configuration
(including
interval
NDP packets and
the holdtime)
Display
information about
the
discovered by NDP
and connected to
specified ports
Display the global
NTDP information
Display
information
collected
NTDP
Command
delete-member
from the
member-num
reboot
{ member-num
mac-address
[ eraseflash ]
quit
quit
between
cluster
{ member-number
mac-address
device
administrator }
Command
the
display ndp
to send
the
neighbors display
port-list
display ntdp
device
display
through [ verbose ]
Huawei Technologies Proprietary
Optional
member
|
Optional
H-H-H }
—
—
Optional
switch-to
|
Switch
H-H-H |
management device view and
the member device view
Optional
You can execute the display
command in any view
ndp interface
ntdp device-list
1-15
Chapter 1 Cluster
Description
between the
Description