Huawei Quidway S3900 Series Operation Manual page 711

Operation Manual – Mirroring
Quidway S3900 Series Ethernet Switches
outbound: only mirrors the packets sent by the port; both: mirrors the packets
received and sent by the port at the same time.
The destination port is specified.
The group number of the mirroring group is specified.
II. Configuring port mirroring in Ethernet port view
Table 1-6 Configure port mirroring in Ethernet port view (1)
Operation
Enter system view
Create a port mirroring
group
Enter Ethernet port
view of the destination
port
Define the current port
as the destination port
Exit current view
Enter Ethernet port
view of the source port
Configure the source
port and specify the
direction
packets to be mirrored
Display
settings
mirroring
Note:
If you specify the destination port and source port in Ethernet port view without creating
a port mirroring group, the mirroring group 1 will be created automatically.
Table 1-7 Configure port mirroring in Ethernet port view (2)
Operation
Enter system view
Create a port mirroring
group
Command
system-view
mirroring-group
local
interface
interface-number
monitor-port
quit
interface
interface-number
mirroring-port { inbound |
of the outbound | both }
parameter
display
of the
{ all | local }
Command
system-view
mirroring-group
local
Huawei Technologies Proprietary
Chapter 1 Mirroring Configuration
group-id
interface-type
interface-type
mirroring-group
group-id
1-7
Description
—
Required
—
Required
LACP and TCP must be
disabled on the destination
port.
—
—
Required
Optional
This command can be
executed in any view.
Description
—
Required