Huawei Quidway S3900 Series Operation Manual page 874

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Set the TFTP file
transmission mode
Specify the ACL
adopted when a
switch attempts to
connect a TFTP
server
III. Specifying the source interface and source IP address for a TFTP client
You can specify the source interface and source IP address for a switch acting as a
TFTP client, so that it connects with a remote TFTP server through the IP address of
the specified interface or the specified IP address.
Table 1-11 Specify the source interface and source IP address for a TFTP client
Operation
Specify
interface so that the TFTP
client uses it to connect
with a TFTP server for the
next time
Specify the source IP
address so that the TFTP
client uses it to connect
with a TFTP server for the
next time
Enter system view
Specify
interface so that the TFTP
client always uses it to
connect
server
Specify the source IP
address so that the TFTP
client always uses it to
connect
server
Display the source IP
address that the TFTP
client always uses it to
connect
server
Command
tftp { ascii | binary }
tftp-server acl acl-number
tftp
the source
source-interface
interface-type
interface-number
source-file [ dest-file ] | put
source-file-url [ dest-file ] }
tftp
ip-address { get source-file
[ dest-file ] | put source-file-url
[ dest-file ] }
system-view
the source
tftp
interface-type
with a TFTP
interface-number
tftp source-ip ip-address
with a TFTP
display tftp source-ip
with a TFTP
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Optional
By default, the binary file
transmission mode is adopted.
Optional
Command
tftp-server
{ get
tftp-server source-ip
source-interface
1-16
Description
Description
Optional
Optional
—
Optional
Optional
This command can be
executed in any view.