Displaying Dhcp/Bootp Client - Huawei Quidway S3900 Series Operation Manual

Operation Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Configuring the management VLAN interface to obtain an IP address through
DHCP
Configuring a default route
II. Configuration procedures
# Enter system view.
<QuidwayA> system-view
# Create VLAN 10 and configure VLAN 10 to be the management VLAN.
[QuidwayA] vlan 10
[QuidwayA-vlan10] quit
[QuidwayA] management-vlan 10
# Create VLAN 10 interface and enter VLAN interface view.
[QuidwayA] interface vlan-interface 10
# Configure the management VLAN interface to obtain an IP address through DHCP.
[QuidwayA-Vlan-interface10] ip address dhcp-alloc
[QuidwayA-Vlan-interface10] quit
# Configure a default route.
[QuidwayA] ip route-static 0.0.0.0 0.0.0.0 1.1.1.2

2.4 Displaying DHCP/BOOTP Client

Table 2-2 Display DHCP/BOOTP client
Operation
Display the information
about
assignment on the DHCP
client
Display
information
BOOTP client
IP address display dhcp client
[ verbose ]
display bootp client
the related
[
about the
vlan-interface
vlan-id ]
Huawei Technologies Proprietary
Chapter 2 DHCP/BOOTP Client Configuration
Command
Optional
You can execute the display
command in any view
interface
2-5
Description